Sidewall part repair & Installation of new part on a Sprinter | W900, W906

Sidewall part repair & Installation of new part on a Sprinter | W900, W906
This is a two component adhesive load the guns with the attached effusive tube pull up the cap and press a small amount of adhesive onto a cloth this enables you to ensure that only fresh adhesive is used to lies if you are using a cartridge which is already been opened bellino do you attach the mixing Cube before you begin with the occasion you must ensure that the adhesive services are completely free of dirt and grease use be Terrace on FL cleaner then apply a small amount of adhesive to a plastic spatula and spread the material from the Rio evenly over the adhesive surface on the vehicle then inspect the adhesive seen with a mirror

Sidewall part repair & Installation of new part on a Sprinter | W900, W906